Wireless Temperature Logging Starter Kit

This kit contains a gateway and a logger. It’s all you need to monitor one location, such as a single vaccine fridge.

$365.00 inc GST

$365.00 inc GST

This kit contains a gateway and a logger. It’s all you need to monitor one location, such as a single vaccine fridge.

SKU: CLKIT-01 Category:

Description

Everything you need to monitor a single fridge or freezer

To make ordering simple, this kit contains a base station and a sensor with backup memory - everything you need to monitor a single location such as a vaccine fridge.

If necessary, you can order additional sensors to monitor other locations.

What’s in the Box:

  • 1x Wireless Temperature Data Logger (CLT-01)
  • 1x Gateway. (CLG-01)
  • 1x Australian AC adapter power supply
  • 1x Ethernet cable to connect to your DSL/Cable modem, or WLAN routers’ Ethernet port.
  • Online web/server hosting for life – there are no subscription/service fee of any kind for life.

Common questions

What happens when the power goes out?

When the power to the gateway goes out, the internet server will recognise that it has lost connection to the gateway and signal an alert.

Depending on how you have configured your account, this can do a number of things including sending an email and sending a notification to your phone.

Your logger will continue to log temperatures and save that data to its internal memory. It can save over 15,000 readings – about a month of readings five minutes apart.

When the connection from the gateway to the internet is re-established, the server will trigger another set of actions. The data saved in the logger’s memory will be uploaded to the internet so there should be no gaps in the record.

How long does the battery last?

The battery is a fairly standard 3V coin-cell battery (Model CR2450). You can buy them at supermarkets, pharmacies, hardware stores, etc for a few dollars.

The battery lasts 12 to 18 months. After 12 months, the system will send out a low battery alert to remind you to change the battery.

How do I replace the battery?

Replacing the battery is quite a quick process, but it can be a bit fiddly.

Here is a video that shows the process…

Sensor Specifications

  • Battery Type: CR2450 x1 (replaceable)
  • Battery Life: 12-18 months 
  • Range: up to 50m line of sight
  • Protocol: Bluetooth 4.0
  • Operation range: -20°C (-4°F) to 60°C (140°F)
  • Accuracy: +/-0.5°C max
  • Memory: 256K (~15,000 readings)

FCCID: ZGW05. FCC Compliance Statement: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modification cautions to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

Other products

Wireless-Temperature-Sensor

Wireless Temperature Sensor with Backup Memory

MORE INFO Wireless-Temperature-Sensor-with-Internal-Memory-Backup

Wireless Temperature Sensor with Backup Memory

MORE INFO

Wireless Sensor with External Temperature Probe

MORE INFO Wireless-Logger-Base-Station

Ethernet
Base Station

MORE INFO